As an Amazon Associate I earn from qualifying purchases.1. Kenwood
Kenwood KSC-SW11 150W Underseat Active Subwoofer with Passive Radiator
Kenwood - Aluminium die cast frame. Speaker level input option. 150 watts peak power handling. Wired remote control level/Freq/Phase control.
| Brand | Kenwood |
| Manufacturer | KENWOOD |
| Height | 6.99 cm (2.75 Inches) |
| Length | 27.94 cm (11 Inches) |
| Weight | 2.8 kg (6.17 Pounds) |
| Width | 19.05 cm (7.5 Inches) |
| Part Number | 21549898 |
| Model | 21549898 |
2. Alpine
8 Inches, Alpine SWE-1200 Active Amplified Underseat Subwoofer Enclosure
Alpine - Variable Low Pass Filter. Super Shallow Structure. Gain Adjustment. Wired Remote Control. 150watt built In Amplifier.
| Brand | Alpine |
| Manufacturer | Alpine |
| Height | 20 cm (7.87 Inches) |
| Length | 20 cm (7.87 Inches) |
| Weight | 1 kg (2.2 Pounds) |
| Width | 20 cm (7.87 Inches) |
| Part Number | SWE-1200 |
| Model | SWE-1200 |
3. VIBE Audio
OPTISOUNDAUTO8A-V2, Black, VIBE Optisound 8" Underseat active bass enclosure
VIBE Audio - High efficiency slot port with almost zero turbulence. Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass. Steel mesh grill for fantastic protection.
| Brand | VIBE Audio |
| Manufacturer | VIBE |
| Height | 8.51 cm (3.35 Inches) |
| Length | 39.8 cm (15.67 Inches) |
| Weight | 6 kg (13.23 Pounds) |
| Width | 31.7 cm (12.48 Inches) |
| Part Number | OPTISOUNDAUTO8A-V2 |
| Model | OPTISOUNDAUTO8A-V2 |
4. Pioneer
Pioneer TS-WX130DA In Car Amplified Subwoofers
Pioneer - Dimensions w x h x d 280 x 200 x 70 Frequency response 40 - 200 Hz. Built in Class D Amplifier. Digital Bass Control Remote. 160 watts max 50 Watts Nominal.
| Brand | Pioneer |
| Manufacturer | Pioneer |
| Height | 11.18 cm (4.4 Inches) |
| Length | 39.37 cm (15.5 Inches) |
| Weight | 3.3 kg (7.28 Pounds) |
| Width | 24.89 cm (9.8 Inches) |
| Part Number | TS-WX130DA |
| Model | TS-WX130DA |
| Warranty | BOG |
5. VIBE
Vibe Audio Optisound Auto 8 Active Amplified Slim Underseat Bass Reflex Subwoofer Enclosure
VIBE - The vibe liteair optisound 8 active enclosure with the VIBE PowerBox Bass 1 Monoblock Amplifier for a superior sound quality. Combined with the new extruded aluminum heatsink this also ensures efficient dispersion of heat.
Remote bass Controller Included: No. Mosfet power allows high switching speeds and even greater stability than other FETs to improve overall performance. This small but capable bass amplifier is capable of delivering up to 900 watts peak and both high and low level inputs allow maximum compatibility with all types of headunit.
| Brand | VIBE |
| Manufacturer | Vibe Audio |
| Part Number | LITEAIRAUTO8A |
| Model | LITEAIRAUTO8A |
6. SSL
8IN 600W LOW AMPD SUB
SSL - Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the LOPRO8 with the source unit. It will be used to connect the lopro8 to your factory radio or an aftermarket radio that does not have low-level RCA inputsS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting.
Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers. Built-in amplifier: with a mosfet power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
Variable low-pashigh level inputs: speaker level inputs are commonly referred to as high-level inputs. You will use the Low-pass filter to primarily keep high notes out of your subwoofers.
| Brand | SSL |
| Manufacturer | SSL |
| Height | 7.11 cm (2.8 Inches) |
| Length | 34.8 cm (13.7 Inches) |
| Weight | 5.22 kg (11.5 Pounds) |
| Width | 24.89 cm (9.8 Inches) |
| Part Number | LOPRO8 |
| Model | LOPRO8 |
7. EDGE
EDGE 10 inch V2 Audio Active Enclosure for Subwoofer,ORANGE
EDGE - Secret channel to hide unsightly wires. Dimensions: 365mm w x 300mm H x 400mm D. Built in ed7200 EDGE amplifier. Subwoofer rms power: 250 watts. Max power: 750 Watts. 3 inch port for better bass response.
| Brand | EDGE |
| Manufacturer | Edge Memory |
| Height | 33 cm (12.99 Inches) |
| Length | 38.5 cm (15.16 Inches) |
| Weight | 11.8 |
| Width | 43 cm (16.93 Inches) |
| Part Number | EDB10A-E2 |
| Model | EDB10A-E2 |
VIBE Audio - High efficiency slot port with almost zero turbulence. Anti resonance bass support system reduces unwanted vibration and delivers cleaner bass. Steel mesh grill for fantastic protection.
Pioneer - Dimensions w x h x d 280 x 200 x 70 Frequency response 40 - 200 Hz. Built in Class D Amplifier. Digital Bass Control Remote. 160 watts max 50 Watts Nominal.
VIBE - The vibe liteair optisound 8 active enclosure with the VIBE PowerBox Bass 1 Monoblock Amplifier for a superior sound quality. Combined with the new extruded aluminum heatsink this also ensures efficient dispersion of heat. Remote bass Controller Included: No. Mosfet power allows high switching speeds and even greater stability than other FETs to improve overall performance. This small but capable bass amplifier is capable of delivering up to 900 watts peak and both high and low level inputs allow maximum compatibility with all types of headunit.
SSL - Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the LOPRO8 with the source unit. It will be used to connect the lopro8 to your factory radio or an aftermarket radio that does not have low-level RCA inputsS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting.
EDGE - Secret channel to hide unsightly wires. Dimensions: 365mm w x 300mm H x 400mm D. Built in ed7200 EDGE amplifier. Subwoofer rms power: 250 watts. Max power: 750 Watts. 3 inch port for better bass response.
