As an Amazon Associate I earn from qualifying purchases.1. Wipex Micra 03-10
Wipex Micra 20003 To 2010 Kit.52 Wiper Linkage Push Rod Set Wipex Kit52
Wipex Micra 03-10 - Nissan micra all models 2003 to 2010 . To fit 2003-2010 models also includes CC models. Order today before 3. 45 pm today. We post 1st class today.
Prise the old ones off. Click the new ones one. Wiper linkage push rod set fitted with new upgraded plastic sockets. Once fitted this push rod set should comfortably last the life of the car.
2. YINETTECH
Windscreen Wiper Linkage Push Rod Arms Kit Wiper Motor Linkage Rod Set Replacement Compatible With MK III 2007-2015 Repair Rod Kit
YINETTECH - Durable: made of high quality carbon steel, ensure maximum strength and durability for extending the life of the car wipers. Installation:Its structure is not complicated, easy to install.
Upgraded: the design of plastic bearings is giving a smoother wipe, and it helps stop the dirt and corrosion of the ball joint.
Measurement: two pcs different lengths of the push rods, 51cm & 405cm, it is also with the white plastic bearings on the rods each side which hole dimension is 1. 1cm. Compatibility: compatible with nissan micra 2007-2015, compatible with micra MK III 2007-2015, Compatible with Micra C+C K12 2007-2015.
3. X
Wiper Rod Replacement Kit For RHD ONLY Micra K12 2003-2010
X - It is a very common fault on this model. The symptoms of this fault are very obvious; windscreen wipers simply not working, there's only one windscreen wiper working or the windscreen wiper movement is erratic or juddering with the wiper link popping off frequently.
The poor quality bearings on your vehicles wiper linkage rods wear causing these symptoms The poor quality plastic bearings on the wiper linkage rods wear and the wiper push rods pop off of their respective ball joint causing the symptoms noted above.
Fit our exclusive high quality replacement push rods and restore your wipers to full health. Fits uk right hand drive nissan micra K12 2003 -2010 - Not suitable for mainland Europe. Until now it has only been possible to buy a whole new wiper mechanism at vast cost which would just fail again.
| Brand | X |
| Manufacturer | X8R |
| Part Number | X8R0032 |
4. Frankberg
Wiper Linkage Windscreen Wiper Attachment without Motor Front for Micra IV K13 1.2L 1.2 DiG-S 2010-2016 288401HB3A
Frankberg - Suitable for micra iv k13 1. 2l k13_ 1. 2 dig-s 2010-2016. Check the corresponding OEM number carefully to determine if it corresponds to the product description. Installation position: front. Note: without motor, for left-hand drive. Reference number: 288401hb3a, 28840-1HB3A.
| Brand | Frankberg |
| Manufacturer | Frankberg |
| Height | 11.5 cm (4.53 Inches) |
| Length | 55 cm (21.65 Inches) |
| Weight | 1.02 |
| Width | 11.5 cm (4.53 Inches) |
| Part Number | 2021041217597 |
5. X
Windscreen Wiper Linkage Push Rod Arms Repair
X - Associated part numbers: 93193922, 13188268, 23003921, 09185807, 93189312. The original soft plastic bush bearings on each end of the two wiper linkage push rods wear down leading to the push rods popping off of their respective ball joint.
For: vauxhall vectra c and signum 2005 to 2009. Fit our high quality replacement push rods and restore your wipers. The symptoms of this fault are very obvious; windscreen wipers simply not working, only one windscreen wiper working, the windscreen wiper movement is erratic or juddering with the wiper link popping off frequently.
Save the cost of a complete replacement mechanism that would just fail again. Our rods are fitted with upgraded high quality plastic bearings giving a smoother wipe, a vast improvement over the OEM part.
The poor quality bearings on your vehicles wiper linkage rods wear causing the linkage arms to pop off. Until now the only option was to buy a whole new wiper mechanism which would just fail again due to same poor quality components. This item is suitable for the later model vehicles mid-2005 to 2009 featuring the flat style push rods as shown in the listing images. It is a very common fault on this model.
| Brand | X |
| Manufacturer | X8R LTD |
| Part Number | X8R0083 |
6. TAKPART
TAKPART Chrome Windscreen Wiper Linkage Motor Repair Cliip Kit Suitable for Punto MK1 MK2 176 188 1Pair
TAKPART - These clips stop the worn wiper linkage ball socket from popping off. Please measure your wiper balljoints before ordering to ensure fitment. Suitable for fiat punto MK1 MK2 176 188.
These clips are designed as temporary repair, although many people have left it months even years. These are universal clips designed for temporary fixes and will only fit balljoints that are smaller than 14mm with a 9. 5mm less recess.
7. ZEALfix
ZEALfix 4Pcs Wiper Linkage Repair Clip Windscreen Wiper motor Linkage Rods Arms Link Mechanism Repair Clip Kit
ZEALfix - Package: windscreen Wiper Linkage Repair Clip x 4. Kindly reminder: Please measure your wiper balljoints before ordering to ensure fitment. Quality: adopted materials that meet strict OEM requirements, perfectly match to the original car.
Fit: suitable for universal wiper linkages with ball joint connections that are smaller than 14mm in diameter. Design: a durable temporary repair kit for a long-term using.
8. Wipex Kit no100 all models 2007 -current
Bipper Nemo Fiorino Qubo wiper Motor linkage rod set .Wipex Kitno.100
Wipex Kit no100 all models 2007 -current - No need to buy Complete systems. Directly interchangeable with original. To fit. Remove the old push rods, click on the newwiper Push Rods.
No need to but complete systems at main dealer prices. Bipper nemo fiorno Qubo 2007 to 2020 all models. Wiper linkage push rod set. Order Today. We post today.
9. Hamimelon
4Pcs Windscreen Wiper Motor Linkage Rods Arms Link Mechanism Repair Clip Fix Kit
Hamimelon - Perfect for replacing the worn linkage and stop your linkage popping off, restoring your wipers to full health. These high quality wiper linkage clips stop the worn wiper linkage ball socket from popping off.
Please measure your wiper balljoints before ordering to ensure fitment. These are universal clips fit balljoints that are smaller than 14mm with a 9. 5mm less recess. Designed as temporary repair, although many people have left it months even years.
10. X
Windscreen Wiper Motor Linkage Link Rod Arms For Qashqai J10 JJ10 2007-2015
X - The poor quality bearings on your vehicles wiper linkage rods wear causing the linkage arms to pop off. The original soft plastic bush bearings on each end of the two wiper linkage push rods wear down leading to the push rods popping off of their respective ball joint. Our rods are fitted with upgraded high-quality plastic bearings giving a smoother wipe.
We have noticed that the ball joint size on the motor part of the linkage can vary. Windscreen wipers simply not working, the windscreen wiper movement is erratic or juddering with the wiper link popping off frequently? Wiper motor can be heard working but no wiper movement? Upon inspecting the linkage mechanism, only one windscreen wiper working, you will see one or both of the linkage rods hanging off.
Our high-quality rods simply push fit on and replace the original worn out rods; this is a very simple process.
Associated part numbers: 28800-JD000, 54527711. It is a very common fault on this model. Nissan qashqai including +2 all models j10, jj10 2007 to 2015. We therefore include an additional bearing bush in case it is the larger size so you can be confident our part will fit your linkage. Until now the only option was to buy a whole new wiper mechanism many customers being quoted £300! which would just fail again due to same poor-quality components. Fit our high-quality replacement push rods and restore your wipers.
| Brand | X |
| Manufacturer | X8R LTD |
| Part Number | X8R0138 |
Wipex Micra 03-10 - Nissan micra all models 2003 to 2010 . To fit 2003-2010 models also includes CC models. Order today before 3. 45 pm today. We post 1st class today. Prise the old ones off. Click the new ones one. Wiper linkage push rod set fitted with new upgraded plastic sockets. Once fitted this push rod set should comfortably last the life of the car.
YINETTECH - Durable: made of high quality carbon steel, ensure maximum strength and durability for extending the life of the car wipers. Installation:Its structure is not complicated, easy to install.
X - It is a very common fault on this model. The symptoms of this fault are very obvious; windscreen wipers simply not working, there's only one windscreen wiper working or the windscreen wiper movement is erratic or juddering with the wiper link popping off frequently.
Frankberg - Suitable for micra iv k13 1. 2l k13_ 1. 2 dig-s 2010-2016. Check the corresponding OEM number carefully to determine if it corresponds to the product description. Installation position: front. Note: without motor, for left-hand drive. Reference number: 288401hb3a, 28840-1HB3A.
X - Associated part numbers: 93193922, 13188268, 23003921, 09185807, 93189312. The original soft plastic bush bearings on each end of the two wiper linkage push rods wear down leading to the push rods popping off of their respective ball joint.
TAKPART - These clips stop the worn wiper linkage ball socket from popping off. Please measure your wiper balljoints before ordering to ensure fitment. Suitable for fiat punto MK1 MK2 176 188. These clips are designed as temporary repair, although many people have left it months even years. These are universal clips designed for temporary fixes and will only fit balljoints that are smaller than 14mm with a 9. 5mm less recess.
ZEALfix - Package: windscreen Wiper Linkage Repair Clip x 4. Kindly reminder: Please measure your wiper balljoints before ordering to ensure fitment. Quality: adopted materials that meet strict OEM requirements, perfectly match to the original car. Fit: suitable for universal wiper linkages with ball joint connections that are smaller than 14mm in diameter. Design: a durable temporary repair kit for a long-term using.
Wipex Kit no100 all models 2007 -current - No need to buy Complete systems. Directly interchangeable with original. To fit. Remove the old push rods, click on the newwiper Push Rods. No need to but complete systems at main dealer prices. Bipper nemo fiorno Qubo 2007 to 2020 all models. Wiper linkage push rod set. Order Today. We post today.
Hamimelon - Perfect for replacing the worn linkage and stop your linkage popping off, restoring your wipers to full health. These high quality wiper linkage clips stop the worn wiper linkage ball socket from popping off. Please measure your wiper balljoints before ordering to ensure fitment. These are universal clips fit balljoints that are smaller than 14mm with a 9. 5mm less recess. Designed as temporary repair, although many people have left it months even years.
X - The poor quality bearings on your vehicles wiper linkage rods wear causing the linkage arms to pop off. The original soft plastic bush bearings on each end of the two wiper linkage push rods wear down leading to the push rods popping off of their respective ball joint. Our rods are fitted with upgraded high-quality plastic bearings giving a smoother wipe.
