Top 10 Inner Tie Rod Tool UK – Car Tie Rod Ends

As an Amazon Associate I earn from qualifying purchases.

1. Mekanik

Mekanik 10pc Inner Tie Rod End Installer Remover Tool Extra Long Shaft Socket Set 1/2" dr

Mekanik - Universal inner tie Rod End Installer Remover Tool. Set. 510mm - 20inch long use with standard 1/2" Ratchet, Power Bar. These tools are specially designed for the inner tie rods that are inaccessible to adjust. These tools are specially designed for the inner tie rods that are inaccessible to adjust. Sizes´╝Ü29mm, 30mm 1-3/8" 31mm 1-7/16" 32mm 1-1/4" 32. 5mm, 33mm 1-5/16" 33. 6mm, 36mm 1-3/16" 38mm 1-1/2".
BrandMekanik
ManufacturerMekanik
Part NumberM1049

2. Mekanik

Mekanik Inner Tie Rod End Tool Multi Purpose 33mm-42mm

Mekanik - Robust tool. Use to replace the inner tie rod ends without replacing the rack and pinion. Capacity 33-42mm.
BrandMekanik
ManufacturerMekanik
Part NumberM2079

3. Mekinik

42mm, Mekinik Tie Rod Wrench, 1/2in.Dr 27mm

Mekinik - Special design to be used with 1/2" Square drive tools. 1/2" sq. The master tie rod tools easily replace inner tie rod ends from 27-42mm diameter without removing the rack and pinion. Chemically blackened finish. Applicable to various vehicles including Mercedes Benz, Nissan, Bmw, Honda, Toyota, Ford, etc . Drive reversible length: 80mm Width: 35mm Internal diameter: 27-42mm.
BrandMekinik
ManufacturerMekanik
Part NumberVT01600A

4. Wonderman Tools

Wonderman Tools Inner Tie Rod End Installer Remover Tool Set Adjuster 1/2" Universal

Wonderman Tools - These tools are specially designed for the inner tie rods that are inaccessiable to adjust. Inner tie rod installer / remover tool set, tool has 1/2" rachet hole on end. Sizes: 1-3/16", 1-5/16", 1-1/4", 14mm, 1-7/16", 17mm &33.6mm to most applicatION. The inner tie rod can be easily removed & installed by slipping the long socket over the tie rod end & connecting it to the open-jaw driver. The long socket can be easily used with seven open-jaw drivers.
BrandWonderman Tools
ManufacturerWondermanTools
Height55 cm (21.65 Inches)
Length10 cm (3.94 Inches)
Weight3.43 kg (7.56 Pounds)
Width17 cm (6.69 Inches)
Part NumberWMT01187

5. FreeTec

FreeTec Inner Tie Rod Removal Installation Tool Kit Car Auto Mechanics with 7 Adapters

FreeTec - The inner pull bar can be easily removed and installed by pushing the long sleeve over the end of the pull rod and connecting to the. The tools are specifically designed for the inner tie rods that are inaccessible to adjust. By slipping the long socket over the tie rod end and connecting it to the open-jaw driver. Should not be used with power tools. Suitable for most applications; our product has one year warranty, if you are interested in the tools, please don't worry.
BrandFreeTec
Manufacturerfreebirdtrading
Height8 cm (3.15 Inches)
Length54 cm (21.26 Inches)
Width17 cm (6.69 Inches)
Part NumberFK0312

6. Mekanic

Mekanic Inner Track Rod Tool 4pc Steering Rack Knuckle Tool Tie End Axial Joint Remova

Mekanic - Available for nearly all european vehicles. 3 exchangeable drive head with ranges: 30-35mm, 35-40mm, 40-45mm. Steering knuckles. Tie rod ends. Universal removal & Installation Service kit.
BrandMekanic
ManufacturerMekanic
Part NumberM1047

7. CCLIFE

Universal Tie Track Rod End Puller Removal Tool Remover 27-42 mm

CCLIFE - For loosening and tightening. Made of high-strength chrome-molybdenum steel. Allows high torque transmission. For replacing tie rods, suitable for inner tie rod end diameters from 27 to 42 mm. 12. 5 mm 1/2' drive.
BrandCCLIFE
ManufacturerCCLIFE
Height3.99 cm (1.57 Inches)
Length8 cm (3.15 Inches)
Width5.99 cm (2.36 Inches)
Part Number1336

8. Neilsen

Red, neilsen CT3182 Track Rod END Remover & Installer 35-45MM

Neilsen - Eliminates the need to dismantle steering rack from the Bulk head. Dr wrench. Work with 27mm hex wrench or 1/2in. Allows quick and easy removal and replacement of Inner steering ball joint.
BrandNeilsen
Manufacturerneilsen
Height2 cm (0.79 Inches)
Length2 cm (0.79 Inches)
Weight0.32 kg (0.71 Pounds)
Width2 cm (0.79 Inches)
Part NumberCT3182
ModelCT3182
Warranty1 year.

9. Mekanik

Mekanik Inner Tie Rod End Installer Remover Tool Set Adjuster Universal Cars 1/2" 7pc

Mekanik - Many inner tie rod end sockets do not have a complete hex on the full length of the socket. Seven crows feet sizes 1-3/16", 1-1/4", 1-7/16", 14mm, 1-5/16", 17mm and 33.6mm. 1/2 inch drive. Works on the inner tie rods were a spanner is bearly possible. Works on the inner tie rods with inaccessible wrench flats. The long socket then slips over the tie rod end and connects to the crows foot.
BrandMekanik
ManufacturerMekanik
Part NumberAT01187

10. Laser

Multi Purpose, Laser 3829 Inner Tie Rod Tool

Laser - Use to replace the inner tie rod ends without replacing the rack and pinion. Main body: h 32. 70mm, l 7021mm, w 58mm, overall height 57. 41mm. Capacity 33-42mm. Robust tool. Universal use.
BrandLaser
ManufacturerTool Connection (EU)
Height18.1 cm (7.13 Inches)
Length6.2 cm (2.44 Inches)
Weight0.5 kg (1.1 Pounds)
Width13.1 cm (5.16 Inches)
Part NumberLAS3829
Model3829